|
|
|
|
|
Synthetic high octane fuel composition |
|
Offer your attention, new production Fluid-anticondensate developed by Company«LN», in laboratory of liquid crystals.
|
Desulfurization of oil products. Desulfurization of coke chemistry products. |
|
SYNTHETICAL HIGH OCTANE FUEL COMPOSITION
Recommendations on synthetic high octane composition usage SHOCU
SHOCU is synthetic component that is product of catalyzed oxidation of olefins by spirits under conditions of braced catalysis
Purpose is a raising of detonational strength of oil, gas and commercial petrol.
Benefits:
1. Octane number RON – 110- regularly divided in all fractions;
2. Wide range of fraction composition, that raises antiknock rating from 35 °Ñ till 144 °Ñ. (For example boiling temperature of methyl-tret-butyl-ether=56,5 °Ñ);
3. Availibility of oxygenates - oxygen-containing components as part of SHOCU promotes raising completeness of fuel combustion, enriching blended motor fuel with oxygen and thereby lowers toxic level of exhaust, lowers combustion heat of fuel, that enlarges engine operating life;
4. Operating life ecologically soft composition (not available metal containing components and benzol).
Areas of use.
1. For raising of Octane Number in commercial petrol preliminary estimation of SHOCU at average equals to 1,25 units for unit of octane number increasing.
2. Petrol combined gas.
3. Petrol combined oil.
Indicator name |
Testing results |
Normative and technical documentation for testing method |
1. Octane number |
110 |
National State Standard 511 |
2. Physical configuration |
Transparent liquid |
|
3. Density at 20°Ñ°Ñ |
0,745-0,790 |
National State Standard 3900 |
4. Colour |
Colourless or straw coloured |
|
5. Fractional composition:
-Starting of distillation
-10% distil over at a temperature of °Ñ
-50% distil over at a temperature of °Ñ
-90% distil over at a temperature of °Ñ
-the end of the boil
residuum in boiling flask,%
residuum and losses, % |
40
52
67
102
144
1,0
2 |
National State Standard 2177 |
6. Mass fraction of benzol, %, not more |
1 |
National State Standard 29040 |
7. Mass fraction of sulfur, %
|
0,005 |
National State Standard 19121 |
8. Copper test |
Endures |
ÃÎÑÒ 6321 |
9. Compatibity with oil petrol |
Complete |
|
|
|